Thursday, December 31, 2015

Mechanical Shutter Experiments



Earlier this week I created another photography video, this time about the experimental shutter I built, some years ago, for the 8" x 10" box camera.

The genesis of this project was having used paper negatives in improvised lens cameras and finding that, due to the speed of the paper (I rate Freestyle Photo's Arista grade 2 RC paper at an exposure index of 12), I'd have to stop down the lens to a very small (2-3mm) aperture, in order to make the shutter speed long enough (>1 second) to accurately and repeatedly time by a hand-operated shutter, in bright daylight landscape conditions.

Under dimmer kinds of light, like window light, I've made a number of satisfying indoor still-life exposures in the daytime, where these improvised lenses, operating at wider apertures, display some interesting optical effects that make the resulting images rather special. But under bright daylight they have to be stopped down so much, in order for their exposures to be timed by hand, that they come to resemble hybrid pinhole/lens optics, lacking those optical aberrations I've come to appreciate from adapted optics, like binocular objectives and meniscus lenses.

So it seemed that I'd need some kind of shutter mechanism. But how?

I spent a long time cogitating about simple mechanical shutters, and ended up making a series of proof-of-concept sketches over several years, trying to find some design that might prove workable. In the end, I felt that I just had to start building something, and so it became a design-as-you-build kind of project, using scrap bits of hardware I'd collected over the years; my motto being something along the lines of never throw anything away, you might use it someday.

What I was trying for was a shutter whose speed could be varied over some practical speed range, to account for differences in exposure. Many of the early designs I considered were simple slit shutters, operated by spring tension and moving either horizontally or vertically, with the width of the slit accounting for the variation in exposure. But I soon realized that with a fixed spring tension a variable slit shutter operating up front at the lens would only yield a small range of speed variations.

After some time I realized that I could make the traveling slit camera into a rotary blade camera, and by altering the angle between the blades the timing could be adjusted. However, my initial idea was much more grand: by slowing down the speed of rotation, I could have a wider range of speeds, from multi-seconds long to fractions of a second, perfect for paper negative media.

P1080490a
But I never got far enough along with this design to build a practical mechanism for slowing down the rotation while making its speed reliable and repeatable. The one big idea I had for this was based on a mechanism I'd seen years earlier, while repairing a Technics audio cassette deck, which was the method used to dampen the speed of the cassette door when it was ejected. Most cassette players used a simple plastic dash-pot mechanism, a piston and cylinder, with an o-ring and some grease, so that as the spring tension tries to slam the door open, the air in the piston is released in a controlled fashion through a small opening, allowing instead the door to slowly and smoothly open. The problem with this design is when the grease hardens up over time, and the cassette door slams open uncontrollably.

Panasonic's method was different. They used a small brass whirligig, a 4-vane rotating piece that was driven to rotate by a drawstring band attached to the door mechanism. As the spring tries to forcefully slam open the door, the band rapidly spins the whirligig, the resulting air pressure slowing down and regulating the speed of the door into a smooth motion. The best part of this design was its reliability, as there were no lubricants to harden over the years.

So my idea for the shutter was to employ this whirligig mechanism, in a small but rapidly turning pulley with vanes, that the shutter cord would spin as the shutter was moving, helping to keep the speed constant. In theory, it sounds plausible; but I never got to the point of implementing it with this shutter.

As you note from the video, the problem with this shutter is that the three speed adjustments, that alter the angle between the blades, don't really offer much variation in speed; and there's too much friction in the mechanism, caused by the way I designed for compensating for light leaks.

The sad thing about this project is that it's sat dormant for some years, as I just couldn't find the motivation to get back to improving it. But now, with these You Tube videos and this blog, perhaps I've painted myself into a corner whereby now I'm forcing myself to get back and finish these projects. And that's a good thing.

Here is a detailed photo of the shutter with the parts labelled, made a few years back; note that I've more recently changed the draw cord from a thin black to thick white cord.

P1080477b
This video was the first of two parts; next week I hope to take the camera out, with shutter attached, and make some usable images. Stay tuned.

5 comments:

  1. Joe,

    I watched with interest your demonstration of your rotary shutter and have a couple thoughts about your problem with that one shutter speed where the lens is left exposed.

    I believe your problem is with the shock absorber. The piston's spring is pushing the shutter backward after impact. What if you had some sort of spring loaded arm sticking up that can only move toward the shock absorber? When the arm passes over the latch, it moves out of the way then the spring brings it back up. After the arm hits the shock absorber, the latch prevents the arm from moving backward. When you want to recock the shutter, just push the latch down so the arm can be brought back to it's starting position.

    The other idea I have is to completely eliminate the shock absorber and it's spring-loaded piston and replace it with a piece of soft foam rubber. When the arm hits the foam there would be no spring to push the arm backward.

    Another thought about that shutter speed where you are having problems with the lens being exposed is that the spring powered cord seems to have no energy left at the end of the exposure so it is not putting any tension on the pulley. Somehow there still needs to be enough stored energy where the cord is still pulling on the shutter mechanism that way the shutter would remain closed.

    I had been thinking of making a Harris / Drop Shutter for my large format camera but what you are doing here might have changed my thinking.

    Thank you for sharing what you have been working on.

    Terry Thomas...
    the photographer
    Atlanta, Georgia USA
    TerryThomasPhotos@gmail.com

    ReplyDelete
  2. Joe,

    I would like to add another thought to my prior note. What about using a pair of rare earth magnets to trap the arm after it hits the shock absorber? Or put one on the shock absorber piston and one on the arm. Then when the arm hits the shock absorber, there won't be any rebound because the magnets will stick together.

    If you have a Harbor Freight in your area you can buy a set of 10 small rare earth magnets for about US $5.

    Thanks.

    Terry Thomas...
    the photographer
    Atlanta, Georgia USA
    TerryThomasPhotos@gmail.com

    ReplyDelete
  3. Joe,

    I just watched your YouTube video detailing the design and construction of the 8x10" camera.

    Then another thought came to me about that shutter speed that leaves the lens exposed:
    You are fighting gravity! When the arm hits the shock absorber, gravity is pulling on the weighted end of the arm. So rotate the shutter 180* so after the arm hits the shock absorber, gravity will pull down on the brass weight thereby keeping the shutter closed.

    Terry Thomas...
    the photographer
    Atlanta, Georgia USA
    TerryThomasPhotos@gmail.com

    ReplyDelete
  4. Joe,

    I was playing with something tonight from a Dollar Tree store and it came to me that it might be the perfect pre-made device to use to lock the swing arm: a carabiner.

    Remove the shock absorber and install a carabiner to trap the swing arm.

    If the shutter has blocked the lens by the time the swing arm is trapped by the carabiner then there is no need for a shock absorber.

    Simple yet effective!

    If you still wanted a shock absorber then set up the carabiner so it can tip back to strike the shock absorber and at the same time it will trap the swing arm in place.

    Terry Thomas...
    the photographer
    Atlanta, Georgia USA
    TerryThomasPhotos@gmail.com

    ReplyDelete
  5. Joe,

    During World War Two the US government had some cameras made that (I believe) were called something like Submarine Cameras or Torpedo Cameras. They had a wide angle lens mounted, used 120 roll film and had an unusual image format something like 2.25" x 5". A newspaper I worked for in Pittsburgh, Pennsylvania back in 1970 owned one.

    What may interest you was that the camera used a "venetian blind" shutter that was mounted behind the lens. I do not remember if there were different shutter speeds available.

    I experimented with it a couple times to create some unusual photos. What amazed me was that the shutter was actually light tight until the shutter was pressed. And also that the resulting image was perfectly even. Before I used it I assumed that part of the blinds that did not move would cast a bit of a shadow on the negative, but it did not.

    Maybe you could find some information on these unusual cameras on the web. Or possibly find one on FleaBay.

    Terry

    ReplyDelete

Please leave a comment; I will curate them before posting.